Ming Xiao Manufacturing Co., Ltd
RM 506,#11 Bldg. Dongcheng Shuian,
Zhonghe Street,Yinzhou District,
Ningbo, 315100, China
Metal Stamping Base-plate
Name: Metal Stamping Base-plate
Material: Carbon Steel
Technics: Punching,Bending,Deep drawing,
Surface Finish: Black powder coating
China metal stamping manufacturer custom produce all kinds of Metal stamping base-plate according to customers' drawing or samples.
If you have any metal stamping parts need to be ordered from China, please don't hesitate to contact with us.
Keywords:Metal Stamping, Metal Stamping Parts, Metal Stamping Bracket, Metal Stamping Strips, Metal Stamping Clamp, Steel Wire Bending Parts, Custom Turning Parts, Progressive Die Stamping Parts, Stamping Parts
What is metal stamping?
Metal Stamping is the forming process of the workpiece (stamping parts) by applying external force to the plate, strip, pipe and profile by press and die to produce plastic deformation or separation. Stamping and forging belong to moulding processing (or pressure machining). The stamping raw materials are mainly hot rolled and cold-rolled steel plates and steel strips.
The mold used for stamping is called a stamping die, or a die for short. Dies are special tools for batch processing materials (metal or non-metal) into the required punches. Dies are very important in stamping.
How we work?
Ming Xiao Manufacturing Co., Ltd specialize in custom metal stamping parts services for all industries, such as customized Metal stamping clamps,Sheet metal frames, Metal seals, Sheet metal brackets, Sheet metal holder,Metal casing, Metal housing, spring clip,Aluminum cover, Round / Square / Rectangular washers, Metal panel, Metal base-plates, metal stamping parts with PEM studs,nuts, screw and pin pressed-in hole or welded.
We are professional metal stamping manufacturers from China Ningbo, we have produced many kinds of metal stamping parts for foreign customers with 15 years experiences, If you are interest in our custom metal stamping services, welcome send your design and requirements to us, we shall work a more competitive price for you.
If you have Metal stamping parts need to be customed from China, welcome contact us to discuss about your projects!
What material can use for metal stamping parts?
Metal sheet, tube of:
CRS (cold rolling steel) sheet, HRS (hot rolling steel) sheet,hot-galvanize steel sheet (SGCC,SPCC,).
stainless steel: 201,304(L),316(L),321,410,420,430
Aluminum alloy: 1060,2024, 3003,5052,6061,etc
All standard brass and copper
What finish can be done for stamping parts
Carbon Steel: Oiled, Heat treating, Carburization, Blackening (black oxide), Zinc plating, Chrome plating, Nickel plating, Tin plating, Powder coating, Painting, hot-dip galvanizing, copper plating, Dacromet, etc
Stainless Steel: Satin finish of Polishing & Milling, Brushed, Passivation, Chemical mirror polishing
Aluminum:Polishing, Brushed, Anodizing, Anodine, Powder coating, Painting, Electrophoresis, Vacuum coating, etc.
Brass / Copper: Brushed, Polishing, Tin Plating, Silver plating, Aging treatment
Our quality supports
For all productions, it's must do strict dimensions measuring:
we can provide the COC, test reports, plating report.
If needed we can provide the certificates of ROHS, SGS... but for small order, the cost should be beared by customers.
Cunrrency: USD $ / EUR €
Tooling & Samples: T/T 100% in davance
Mass Production: 30%-50% in advance, balance against to the B/L if ship by sea. If ship by air, the balance need pay before delivery
Price Terms: FOB Ningbo, FOB Shanghai, CIF Destination port, EXW, for small batch air freight can do door to door.
Lead Time: 15days for samples ( for sample of stamping parts, we do not make the punching die directly, we use wire cutting to get the workpiece, then bending, this can avoid the waste if the dimensions has problem, after samples approved, then we make the punching die for mass production). mass production is 30-60days generally, we are also can rush production if customer need it urgent.